AMERICAN INDUSTRIAL SUPPLY INC -- AMER-STEEL  -- 8030-00N014906
<pre>=====================  Product Identification  =====================

Product ID:AMER-STEEL
MSDS Date:07/19/1988
FSC:8030
NIIN:00N014906
=== Responsible Party ===
Company Name:AMERICAN INDUSTRIAL SUPPLY INC
Box:10816
City:GLENDALE
State:CA
ZIP:91209-3816
Country:US
Emergency Phone Num:818-500-0961
CAGE:0ENL6
=== Contractor Identification ===
Company Name:AMERICAN INDUSTRIAL SUPPLY INC
Box:10996
City:BURBANK
State:CA
ZIP:91510-0996
Country:US
Phone:818-841-7788
CAGE:0ENL6
Company Name:INDUSTRIAL FLOOR FINISHES
Address:605 SPRINGS RD
City:BEDFORD
State:MA
ZIP:01730
Country:US
Phone:1-617-667-5161
CAGE:INDUS

=============  Composition/Information on Ingredients  =============

Ingred Name:MINERAL SPIRITS, POLYURETHANE RESIN SOLN
CAS:64742-88-7
ACGIH TLV:85 PPM (MFR)

Ingred Name:PROPANE
CAS:74-98-6
RTECS #:TX2275000
OSHA PEL:1000 PPM
ACGIH TLV:ASPHYXIANT; 9192

Ingred Name:PROPANE, 2-METHYL (ISOBUTANE)
CAS:75-28-5
RTECS #:TZ4300000

Ingred Name:PROT GLOVES: WEAR RESISTANT GLOVES SUCH AS: NEOPRENE,
    NITRILE RUBBER OR POLYVINYL CHLORIDE.
RTECS #:9999999ZZ

Ingred Name:METHYL CHLOROFORM (1,1,1-TRICHLOROEHANE)  (SARA III)
CAS:71-55-6
RTECS #:KJ2975000
OSHA PEL:350 PPM/450 STEL
ACGIH TLV:350 PPM/450STEL;9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Ozone Depleting Chemical:1

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL: MINIMAL EFTS < 1000 PPM,
    DIZZ, DROW & THROAT IRRIT @ LEVELS > 1000 PPM. UNCON & DEATH POSS @
    LEVELS > 10,000 PPM. BLOOD PRESS DEPRESS, CARDIAC SENSIT &
    VENTRICULARARRHYTHMIA CAN RSLT FRO M EXPOSURE TO NEAR ANESTHETIC
    LEVELS. SKIN: PRLNG/RPTD CNTCT CAN CAUSE MOD IRRIT, DEFAT & DERMAT.
    (SEE EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: EYES: CAN CAUSE SEV IRRIT, REDNESS,
    TEARING & BLURRED VISION. INGEST: SINGLE DOSE TOX IS LOW TO MOD. IF
    VOMIT OCCURS, ASPIR INTO LUNGS CAN CAUSE CHEM PNEUM & SYSTEMIC
    EFTS. CHLOROCARBON/CHLO ROFLUOROCARBON (CFC) MATLS HAVE PRODUCED
    SENSIT OF THE MYOCARDIUM TO EPINEPHRINE IN LAB ANIMALS & COULD (SEE
    SUPP DATA)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH W/WATER FOR AT LEAST 15 MIN, LIFTING UPPER &
    LOWER LIDS. GET MEDICAL ATTN. SKIN: WASH EXPOSED AREA W/SOAP &
    WATER. INHAL: REMOVE TO FRESH AIR. IF BREATHING DIFFICULT,
    ADMINISTER OXYGEN. IF  BREATHING STOPPED, GIVE ARTIFICIAL
    RESPIRATION. GET MEDICAL ATTN. INGEST: DO NOT INDUCE VOMITING. GET
    MEDICAL ATTN IMMEDIATELY. ASPIRATION OF MATL INTO THE DUE TO
    VOMITING CAN CAUSE CHEM PNEUMONITIS.

=====================  Fire Fighting Measures  =====================

Flash Point:NONE
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL.
Fire Fighting Procedures:KEEP CNTNRS COOL. USE EQUIP/SHIELDING TO PROT
    PERS AGAINST BURSTING/RUPTURING/VENTING CNTNRS. WEAR NIOSH/MSHA
    APPRVD PRESS DEMAND SCBA & FULL PROT EQUIP .
Unusual Fire/Explosion Hazard:AT ELEVATED TEMPERATURES (ABOVE 120F)
    CONTAINERS MAY VENT, RUPTURE OR BURST. THERMAL DECOMPOSITION
    PRODUCTS MAY INCLUDE HCL AND PHOSGENE .

==================  Accidental Release Measures  ==================

Spill Release Procedures:CLEAN UP AREA BY MOPPING OR WITH ABSORBENT
    MATERIALS AND PLACE IN CLOSED CONTAINERS FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE AT TEMPS > 120F. PLS READ
    & FOLLOW DIRECTIONS ON PROD LBL, THEY ARE YOUR BEST GUIDE TO USING
    PROD MOST EFFECTIVELY, & (SEE OTHER PREC)
Other Precautions:HNDLG/STOR PREC: GIVE NECESSARY SAFETY PREC TO PROT
    YOUR HEALTH. NO SMOKING IN AREA OF USE. DO NOT USE IN THE GENL
    VICIN OF ARC WELDING, OPEN FLAME OR HOT SURFACES. HEAT AND/OR UV
    RADIATION MAY CAUSE  THE FORMATION OF HCL & PHOSGENE .

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:APPROVED ORGANIC VAPOR TYPE RESPIRATOR
    ACCEPTABLE IF CONCENTRATION IS 350-1000 PPM.
Ventilation:PROVIDE SUFFICIENT MECHANICAL (GENERAL) AND/OR LOCAL
    EXHAUST VENTILATION TO MAINTAIN EXPOSURE BELOW TLVS.
Protective Gloves:SEE INGRED 05
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:DO NOT EAT, DRINK OR SMOKE IN WORK AREA. WASH
    HANDS BEFORE EATING.
Supplemental Safety and Health
EFTS OF OVEREXP: HAVE A SIMILAR EFT IN HUMANS. ADRENOMIMETICS (I.E.
    EPINEPHRINE) MAY BE CONTRAINDICATED EXCEPT FOR LIFE-SUSTAINING USES
    IN HUMANS ACUTELY/CHRONICALLY EXPOSED TO CHLOROCARBONS/CFCS. WAS TE
    DISP METH: PERMITTED WASTE MGT FAC. CNSLT FED, ST & LOCAL AUTH.

==================  Physical/Chemical Properties  ==================

HCC:V4
Boiling Pt:B.P. Text:160F,71C
Vapor Pres:35 @ 20C
Spec Gravity:1.260 @ 75F
Solubility in Water:NEGLIGIBLE
Appearance and Odor:STEEL COLORED LIQUID, CHARACTERISTIC ODOR.
Percent Volatiles by Volume:90

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ALKALIES, OXIDIZERS, ALUMINUM AND OTHER REACTIVE METALS.
Stability Condition to Avoid:DO NOT EXPOSE TO TEMPERATURES ABOVE 120F.
Hazardous Decomposition Products:HYDROGEN CHLORIDE, PHOSGENE (SMALL
    AMOUNTS).

====================  Disposal Considerations  ====================

Waste Disposal Methods:WHEN USED PROPERLY AEROSOL PRODUCTS DO NOT
    GENERATE HAZARDOUS WASTE. EMPTY DEPRESSURIZED CONTAINERS CANNOT BE
    REUSED & SHOULD BE WRAPPED & PUT IN TRASH COLLECTION. CANS WHICH
    ARE PRESSURIZED OR CONTAI N LIQUID MUST BE DISPOSED OF IN A (SEE
    SUPP DATA)

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.