WILLIAM K WESTLEY CO -- "B'LASTER" 404-AIR TOOL OIL & CONDITIONER  -- 9150-00N056140
<pre>=====================  Product Identification  =====================

Product ID:"B'LASTER" 404-AIR TOOL OIL & CONDITIONER
MSDS Date:07/17/1992
FSC:9150
NIIN:00N056140
=== Responsible Party ===
Company Name:WILLIAM K WESTLEY CO
Address:9545 MIDWEST AVE STE D
City:GARFIELD HTS
State:OH
ZIP:44125
Country:US
Info Phone Num:216-587-0011
Emergency Phone Num:800-858-6605
CAGE:0BNB4
=== Contractor Identification ===
Company Name:WILLIAM K WESTLEY CO
Address:9545 MIDWEST AVE STE D
Box:City:GARFIELD HTS
State:OH
ZIP:44125
Country:US
Phone:216-587-0011
CAGE:0BNB4

=============  Composition/Information on Ingredients  =============

Ingred Name:VM&P NAPHTHA; (PETROLEUM DISTILLATE)
CAS:64742-48-9
Fraction by Wt: <27%
OSHA PEL:300 PPM (MFR)
ACGIH TLV:300 PPM (MFR)

Ingred Name:ISOPROPYL ALCOHOL; (ISO ALCOHOL)  (SARA III)
CAS:67-63-0
RTECS #:NT8050000
Fraction by Wt: 15%
OSHA PEL:400 PPM
ACGIH TLV:400 PPM;500 STEL

Ingred Name:FLUID-AP; (MIX-POLYALKYLENE GLYCOL)
CAS:9003-13-8
RTECS #:LL3130000
Fraction by Wt: <3%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:PHOSHORDITHIOIC ACID, ZINC SALT; (ZINC DITHIOPHOSPHATE)
CAS:19210-06-1
RTECS #:TE4800000
Fraction by Wt: <3%
OSHA PEL:5 MG/PCM (MFR)
ACGIH TLV:5 MG/PCM (MFR)

Ingred Name:ANILINE; (AMINOBENZENE)  (SARA III)
CAS:62-53-3
RTECS #:BW6650000
Fraction by Wt: <0.5%
OSHA PEL:5 PPM, S
ACGIH TLV:2 PPM, S
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:CRESYLIC BLEND
Fraction by Wt: <0.5%
OSHA PEL:5 PPM (MFR)
ACGIH TLV:5 PPM (MFR)

Ingred Name:VOLATILE ORGANIC COMPONENT: 43.7%.
RTECS #:9999999VO

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ING 1:SKIN:PROLONGED OR REPEATED
    CONTACT W/THIS PRODUCT TENDS TO REMOVE SKIN OILS POSSIBLY LEADING
    TO IRRITATION & DERMATITIS. EYE:PRODUCT CONTACTING EYES MAY CAUSE
    IRRITATION. ING 2:INHAL:PROLONGED O VEREXPOSURE MAY CAUSE COUGHING,
    SHORTNESS OF BREATH, DIZZINESS & INTOXICATION. EYE CONTACT:MAY
    CAUSE (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:MODERATE IRRITATION, INCLUDING BURNING
    SENSATION, TEARING, REDNESS OR SWELLING.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INGEST:CALL MD IMMEDIATELY . SKIN:WASH W/SOAP & WATER,
    EMOLLIENT CREAM IS BENEFICIAL. EYE:FLUSH W/WATER FOR AT LEAST 15
    MINUTES. INHAL:PROVIDE W/FRESH AIR & REST. CONSULT MD IF NECESSARY.

=====================  Fire Fighting Measures  =====================

Flash Point Method:OC
Flash Point:65.0F,18.3C
Extinguishing Media:MECHANICAL FOAM, DRY CHEMICAL, WATER FOG, CO*2.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:AVOID OPEN FLAME. PROVIDE ADEQUATE
    VENTILATION. COLLECT & DISPOSE OF ALL SPILLED LIQUID.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE AWAY FROM OPEN FLAME & EXTREME
    HEAT.
Other Precautions:AVOID EYE CONTACT.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IN INADEQUATELY VENTILATED AREAS - USE
    NIOSH/MHSA APPROVED SELF-CONTAINED BREATHING APPARATUS.
Ventilation:LOCAL EXHAUST: TO A SAFE AREA.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:ANSI APPROVED EYE BATH & SAFETY SHOWERS .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:180F,82C
Melt/Freeze Pt:M.P/F.P Text:28.0F,-2.2C
Vapor Pres:0.03
Vapor Density:2.8
Spec Gravity:0.84 (H*2O=1)
pH:5.5
Evaporation Rate &amp; Reference:0.1 (BUTYL ACETATE=1)
Solubility in Water:10%
Appearance and Odor:RED, CLEAR COLOR; NON-IRRITATING ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE CURRENTLY KNOWN.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
    REGULATIONS . COLLECT & DISPOSE OF THE SAME AS FOR OIL OR ALIPHATIC
    SOLVENTS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.